Raspberry Pi No-IP Client

Dynamic IP adres? No problem!

Note - Its important you create yourself an account and add a host on no-ip before installing the client as you will need your account details as part of the install.

Install no-ip client:

Create a directory for the client software

mkdir /home/pi/noip
[ENTER]
cd /home/pi/noip

Download the client software

wget http://www.no-ip.com/client/linux/noip-duc-linux.tar.gz
[ENTER]

Extract the archivetar vzxf noip-duc-linux.tar.gz
[ENTER]

Navigate to the archive directoryNote - use 'ls' to check the directory name create when the archive was extracted, it was noip-2.1.9-1 when I installed the client.

cd noip-2.1.9-1
[ENTER] 

Compile and install
The client was compiled and installed on the Raspberry Pi, using the following commands: 

sudo make
[ENTER]sudo make install

During the install I was asked to proide my login, password and a refresh interval.
Run the clientThe client is run using the following command:

sudo /usr/local/bin/noip2

[ENTER]

The client runs continuously until shutdown or the Raspberry Pi is shutdown.
taken from http://raspberrypihelp.net